Wetting behavior for Ni on (Ti0.95Mo0.05)(C 0.5N0.5), (Ti0.9Nb0.1)(C 0.5N0.5) and (Ti0.85Nb0.1Mo 0.05)(C0.5N0.5) substrates

Hiroyuki Hosokawa, Koji Shimojima, Akihiro Matsumoto, Kiyotaka Kato, Tetsushi Matsuda, Hideaki Matsubara

研究成果: Article査読

2 被引用数 (Scopus)

抄録

Wetting tests for Ni on (Ti0.95Mo0.05)(C 0.5N0.5), (Ti0.9Nb0.1)(C 0.5N0.5) and (Ti0.85Nb0.1Mo 0.05)(C0.5N0.5) ceramics were carried out at 1823K and compared with those for the previous data. The larger the Mo content was, the smaller the contact angles were. The contact angle for (Ti 0.85Nb0.1Mo0.05)(C0.5N 0.5) was smaller than for (Ti0.95Mo0.05)(C 0.5N0.5). No new phase was observed on cross sections of the wet tested samples and microstructures could be divided into three regions: a Ni-rich region, reactive region, and substrate region. The depth of reactive region/height of Ni-rich region ratios for titanium carbonitrides containing Nb were larger than those for them containing Mo, and (Ti0.85Nb 0.1Mo0.05)(C0.5N0.5) had the largest ratio in all the samples.

本文言語English
ページ(範囲)367-370
ページ数4
ジャーナルMaterials Transactions
54
3
DOI
出版ステータスPublished - 2013

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Wetting behavior for Ni on (Ti<sub>0.95</sub>Mo<sub>0.05</sub>)(C <sub>0.5</sub>N<sub>0.5</sub>), (Ti<sub>0.9</sub>Nb<sub>0.1</sub>)(C <sub>0.5</sub>N<sub>0.5</sub>) and (Ti<sub>0.85</sub>Nb<sub>0.1</sub>Mo <sub>0.05</sub>)(C<sub>0.5</sub>N<sub>0.5</sub>) substrates」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル