Unveiling a new type of ultradense anomalous metallic glass with improved strength and ductility through a high-pressure heat treatment

Rui Yamada, Yuki Shibazaki, Yasuto Abe, Wookha Ryu, Junji Saida

研究成果: Article査読

11 被引用数 (Scopus)

抄録

An anomalous glass was discovered through high-pressure heat treatment (5.5 GPa at 850 K) followed by rapid cooling of a Zr50Cu40Al10 metallic glass. Despite a reduction in the crystallization temperature and enthalpy, high-resolution transmission electron microscopy analysis revealed that the collected bulk sample maintained a fully amorphous structure. The density of the sample was 0.6% larger than that of the as-cast state and was even larger than that of the partially crystallized state. These results suggest the formation of an ultradense packing glass that cannot be obtained through conventional annealing. Compression test results indicated a significant increase in the Young’s modulus and fracture strength, supporting the creation of an anomalous metallic glass. In addition, plasticity was observed in the treated sample. It was therefore concluded that the high-pressure heat treatment enabled the creation of a new type of glass that is normally overshadowed by the crystallized phase at atmospheric pressure. We explained the creation of the ultradense glass by introducing a pressure parameter (P) to the conventional volume (v) - temperature (T) diagram.

本文言語English
論文番号72
ジャーナルNPG Asia Materials
11
1
DOI
出版ステータスPublished - 2019 12月 1

ASJC Scopus subject areas

  • モデリングとシミュレーション
  • 材料科学(全般)
  • 凝縮系物理学

フィンガープリント

「Unveiling a new type of ultradense anomalous metallic glass with improved strength and ductility through a high-pressure heat treatment」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル