Ti-V-Cr b.c.c. alloys with high protium content

M. Okada, T. Kuriiwa, T. Tamura, H. Takamura, A. Kamegawa

研究成果: Conference article査読

163 被引用数 (Scopus)

抄録

The effects of composition and heat-treatment on the protium absorption-desorption properties of Ti-V-Cr alloys were investigated. It was found that the Ti-35V-40Cr alloy shows a 2.6 mass% protium capacity. The plateau pressure of the Ti-35V-xCr alloys increased with decreasing lattice constants associated with increasing Cr content. The main phase of the as-cast Ti-xV-Cr (Cr/Ti=40/25) alloys containing more than 15%V was a b.c.c. phase. These b.c.c. alloys exhibited a 2.4 mass% protium capacity. Heat-treatment over 1673 K was effective on stabilizing the b.c.c. structure for the Ti-xV-Cr (Cr/Ti=2/3) alloys with low V content. The Ti-5V-57.5Cr alloy heat-treated at 1673 K for 1 h yields a high capacity of 2.8 mass% protium, which is the highest value at 313 K reported so far. The alloy is economically promising since it contains low amounts of expensive V metal.

本文言語English
ページ(範囲)511-516
ページ数6
ジャーナルJournal of Alloys and Compounds
330-332
DOI
出版ステータスPublished - 2002 1月 17
イベントProceedings of the International Symposium on Metal-Hydrogen (MH 2000) - Noosa Heads, QLD, Australia
継続期間: 2000 10月 12000 10月 6

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Ti-V-Cr b.c.c. alloys with high protium content」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル