The origin of midrib in lenticular martensite

Akinobu Shibata, Toshio Murakami, Shigekazu Morito, Tadashi Furuhara, Tadashi Maki

研究成果: Article査読

1 被引用数 (Scopus)

抄録

In the present paper, the origin of midrib in lenticular martensite is clarified by examining the similarity between midrib and thin plate martensite in detail and studying the stress-induced growth behavior of thin plate martensite at various temperatures. Although lenticular martensite, especially midrib, exhibits a zigzag array in general, some martensite plates which are branched or kinked were also observed as thin plate martensite. The substructure of midrib is completely twinned and the orientation relationship of midrib with respect to austenite is close to Greninger-Troiano relationship. The morphology, substructure and crystallographic features of midrib in lenticular martensite are quite similar to those of thin plate martensite. Furthermore, stressinduced growth behavior of thin plate martensite changes with deformation temperature. Thermally-transformed thin plate martensite grows keeping a thin plate shape when deformed at temperature close to the Ms temperature. However, it grows into a lenticular shape accompanied by a substructure with a high density of dislocations after deformation at temperature much higher than Ms temperature. Therefore, it is concluded that midrib in lenticular martensite is thin plate martensite itself. The difference between lenticular martensite and thin plate martensite is only in their growth behaviors.

本文言語English
ページ(範囲)290-298
ページ数9
ジャーナルNippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals
73
4
DOI
出版ステータスPublished - 2009 4月

ASJC Scopus subject areas

  • 凝縮系物理学
  • 材料力学
  • 金属および合金
  • 材料化学

フィンガープリント

「The origin of midrib in lenticular martensite」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル