Temperature compensation of ball surface acoustic wave sensor by two-frequency measurement using undersampling

Toshihiro Tsuji, Toru Oizumi, Nobuo Takeda, Shingo Akao, Yusuke Tsukahara, Kazushi Yamanaka

研究成果: Article

11 引用 (Scopus)

抜粋

To realize a practical two-frequency measurement (TFM) system for precise Temperature compensation in a ball surface acoustic wave (SAW) sensor, the application of undersampling (US) was investigated. The subtraction coefficient for the Temperature compensation in US was theoretically explained. The principle of the TFM system using US was simulated by the decimation of the oversampling (OS) waveform after applying a narrow band-pass filter, and the delay time was measured using a wavelet transform. In the application of the method to trace moisture measurement, the delay time response due to US matched that due to OS with a correlation coefficient higher than 0.9999. Although rms noise was increased by US, the response to the concentration change of 4-17 nmol/mol was measured with a signal-to-noise ratio higher than 20. From these results, it was shown that the precise output of the ball SAW sensor could be obtained even when using US, which was equivalent to that using OS.

元の言語English
記事番号07HD13
ジャーナルJapanese journal of applied physics
54
発行部数7
DOI
出版物ステータスPublished - 2015 7 1

ASJC Scopus subject areas

  • Engineering(all)
  • Physics and Astronomy(all)

フィンガープリント Temperature compensation of ball surface acoustic wave sensor by two-frequency measurement using undersampling' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用