Study of permeability for composites including Fe, NiZn ferrite and Fe-B-P particles

C. Yao; Y. Shimada; G. W. Qin; W. L. Pei; S. Okamoto; O. Kitakami; Y. Endo; M. Yamaguchi

doi:10.1109/TMAG.2011.2148698

Study of permeability for composites including Fe, NiZn ferrite and Fe-B-P particles

C. Yao, Y. Shimada, G. W. Qin, W. L. Pei, S. Okamoto, O. Kitakami, Y. Endo, M. Yamaguchi

研究成果: Article › 査読

5 被引用数 (Scopus)

抄録

Fe microparticle composites with different nanoparticles were prepared using Ni-Zn ferrite and Fe-B-P amorphous nanoparticles. Both additions into iron microparticles significantly increase magnetic permeability, whereas Fe-FeBP composite exhibits more advantages than Fe-(Ni_0.6Zn _0.4)Fe₂O₄ composite due to higher saturation magnetization (Ms). The magnetic field range with high permeability is about 0-600 Oe for Fe-FeBP composite, whereas it decreases to 0-80 Oe for Fe-(Ni _0.6Zn_0.4)Fe₂O₄ composite. The permeability of Fe-FeBP composite remains high up to about 1 GHz and the resonance frequency is about 2 GHz, which is higher than that of Fe-(Ni _0.6Zn_0.4)Fe₂O₄ composite.

本文言語	English
論文番号	6028249
ページ（範囲）	3160-3162
ページ数	3
ジャーナル	IEEE Transactions on Magnetics
巻	47
号	10
DOI	https://doi.org/10.1109/TMAG.2011.2148698
出版ステータス	Published - 2011 10

ASJC Scopus subject areas

Electronic, Optical and Magnetic Materials
Electrical and Electronic Engineering

文献へのアクセス

10.1109/TMAG.2011.2148698

フィンガープリント「Study of permeability for composites including Fe, NiZn ferrite and Fe-B-P particles」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

@article{6a2531318c3b4637905417b9fdc848b7,

title = "Study of permeability for composites including Fe, NiZn ferrite and Fe-B-P particles",

abstract = "Fe microparticle composites with different nanoparticles were prepared using Ni-Zn ferrite and Fe-B-P amorphous nanoparticles. Both additions into iron microparticles significantly increase magnetic permeability, whereas Fe-FeBP composite exhibits more advantages than Fe-(Ni0.6Zn 0.4)Fe2O4 composite due to higher saturation magnetization (Ms). The magnetic field range with high permeability is about 0-600 Oe for Fe-FeBP composite, whereas it decreases to 0-80 Oe for Fe-(Ni 0.6Zn0.4)Fe2O4 composite. The permeability of Fe-FeBP composite remains high up to about 1 GHz and the resonance frequency is about 2 GHz, which is higher than that of Fe-(Ni 0.6Zn0.4)Fe2O4 composite.",

keywords = "Composite, high frequency, particles, permeability",

author = "C. Yao and Y. Shimada and Qin, {G. W.} and Pei, {W. L.} and S. Okamoto and O. Kitakami and Y. Endo and M. Yamaguchi",

note = "Funding Information: This work was supported in part by Development of Technical Examination Services Concerning Frequency Crowding from the Ministry of Internal Affairs and Communications of Japan. This work was also supported by Chinese Ministry of Education (No. 108039 and No. N100702001).",

year = "2011",

month = oct,

doi = "10.1109/TMAG.2011.2148698",

language = "English",

volume = "47",

pages = "3160--3162",

journal = "IEEE Transactions on Magnetics",

issn = "0018-9464",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "10",

}

TY - JOUR

T1 - Study of permeability for composites including Fe, NiZn ferrite and Fe-B-P particles

AU - Yao, C.

AU - Shimada, Y.

AU - Qin, G. W.

AU - Pei, W. L.

AU - Okamoto, S.

AU - Kitakami, O.

AU - Endo, Y.

AU - Yamaguchi, M.

N1 - Funding Information: This work was supported in part by Development of Technical Examination Services Concerning Frequency Crowding from the Ministry of Internal Affairs and Communications of Japan. This work was also supported by Chinese Ministry of Education (No. 108039 and No. N100702001).

PY - 2011/10

Y1 - 2011/10

N2 - Fe microparticle composites with different nanoparticles were prepared using Ni-Zn ferrite and Fe-B-P amorphous nanoparticles. Both additions into iron microparticles significantly increase magnetic permeability, whereas Fe-FeBP composite exhibits more advantages than Fe-(Ni0.6Zn 0.4)Fe2O4 composite due to higher saturation magnetization (Ms). The magnetic field range with high permeability is about 0-600 Oe for Fe-FeBP composite, whereas it decreases to 0-80 Oe for Fe-(Ni 0.6Zn0.4)Fe2O4 composite. The permeability of Fe-FeBP composite remains high up to about 1 GHz and the resonance frequency is about 2 GHz, which is higher than that of Fe-(Ni 0.6Zn0.4)Fe2O4 composite.

AB - Fe microparticle composites with different nanoparticles were prepared using Ni-Zn ferrite and Fe-B-P amorphous nanoparticles. Both additions into iron microparticles significantly increase magnetic permeability, whereas Fe-FeBP composite exhibits more advantages than Fe-(Ni0.6Zn 0.4)Fe2O4 composite due to higher saturation magnetization (Ms). The magnetic field range with high permeability is about 0-600 Oe for Fe-FeBP composite, whereas it decreases to 0-80 Oe for Fe-(Ni 0.6Zn0.4)Fe2O4 composite. The permeability of Fe-FeBP composite remains high up to about 1 GHz and the resonance frequency is about 2 GHz, which is higher than that of Fe-(Ni 0.6Zn0.4)Fe2O4 composite.

KW - Composite

KW - high frequency

KW - particles

KW - permeability

UR - http://www.scopus.com/inward/record.url?scp=80053466628&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053466628&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2011.2148698

DO - 10.1109/TMAG.2011.2148698

M3 - Article

AN - SCOPUS:80053466628

VL - 47

SP - 3160

EP - 3162

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 10

M1 - 6028249

ER -