Structure and magnetic properties of melt-spun Fe-Pt-B alloys with high B concentrations

Wei Zhang, Dianguo Ma, Yanhui Li, Kunio Yubuta, Xiaoyu Liang, Dongliang Peng

研究成果: Article査読

7 被引用数 (Scopus)

抄録

The phase evolution, thermal stability, structure and magnetic properties of the melt-spun Fe70-xPtxB30 (x = 0-20) alloys have been investigated. Addition of small amounts of Pt to the Fe70B30 alloy increases the amorphous-forming ability, leading to the formation of an amorphous phase in the alloys with x = 5 and 10. Further increase in Pt content results in the formation of the fcc-FePt + Fe2B or fcc-FePt + L10-FePt + Fe2B crystalline phases. After appropriate annealing, the homogeneous nano-sized structure consisting of hard L10-FePt and soft Fe2B magnetic phases were formed for the alloys with x = 10-20, which exhibited good hard magnetic properties. As the Pt content increase, the coercivity (iHc) of the L10-FePt/Fe2B nanocomposite alloys significantly increased, while the remanence (Br) decreased. The Br, reduced remanence (Mr/Ms), iHc, and energy product (BH)max of the alloys are in the range of 0.81-1.20 T, 0.76-0.84, 173.2-523.1 kA/m, and 64.0-88.3 kJ/m3, respectively.

本文言語English
ページ(範囲)S252-S255
ジャーナルJournal of Alloys and Compounds
615
S1
DOI
出版ステータスPublished - 2015 1 15

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Structure and magnetic properties of melt-spun Fe-Pt-B alloys with high B concentrations」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル