Stress-development mechanism during cobalt-silicide film formation

Hiromi Shimazu, Hideo Miura

研究成果: Article査読

2 被引用数 (Scopus)

抄録

The silicidation-induced stress developing during Co-silicide formation was discussed experimentally. Co films deposited on Si substrates were annealed to form the silicide films. The formation of CoSi and CoSi2 started at about 400°C and 600°C, respectively. The stress-development mechanism in the reacted films was discussed based on the measurement results of both the internal stress and the thermal stress of Co, CoSi and CoSi2 films. Silicidation-induced stress was defined as the difference between the measured internal stress after the silicidation and the assumed internal stress which was calculated by extending thermal stress curve before silicidation. The silicidation-induced stresses were about 300 MPa for CoSi formation and about 500 MPa for CoSi2 formation.

本文言語English
ページ(範囲)1392-1397
ページ数6
ジャーナルNihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A
66
647
DOI
出版ステータスPublished - 2000
外部発表はい

ASJC Scopus subject areas

  • 材料科学(全般)
  • 材料力学
  • 機械工学

フィンガープリント

「Stress-development mechanism during cobalt-silicide film formation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル