Stress corrosion cracking of high strength steels and their weldments in synthetic sea water

J. K. Lim; T. Shoji; J. W. Who; S. H. Chung; H. Takahashi

Stress corrosion cracking of high strength steels and their weldments in synthetic sea water

J. K. Lim, T. Shoji, J. W. Who, S. H. Chung, H. Takahashi

未来科学技術共同研究センター

研究成果: Conference article › 査読

抄録

SCC susceptibility of three kinds of steel in synthetic seawater was evaluated by slow strain rate tests (SSRT) as a function of solution pH, electrochemical potential and strain rate. Strain rate dependance on SCC susceptibility was remarkable in the corrosion environment in terms of ultimate tensile strength, reduction of area and rupture elongation. Strain rate effects were examined in detail in terms of applied strain rate and local strain rate as well. Local strain rate at necked region after Pmax was much higher than averaged nominal rate at 4.17×10^-7 sec^-1 and several cracks were observed only at the necked region in the S.S.W.

本文言語	English
ページ（範囲）	113-118
ページ数	6
ジャーナル	Mechanical and corrosion properties. Series A, Key engineering materials
巻	51-52
出版ステータス	Published - 1991 1 1
イベント	Proceedings of the KSME/JSME Joint Conference - Seoul, South Korea 継続期間: 1990 7 6 → 1990 7 7

ASJC Scopus subject areas

Engineering(all)

フィンガープリント「Stress corrosion cracking of high strength steels and their weldments in synthetic sea water」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

@article{f9bde09212ed426c8ff6b2660f08b567,

title = "Stress corrosion cracking of high strength steels and their weldments in synthetic sea water",

abstract = "SCC susceptibility of three kinds of steel in synthetic seawater was evaluated by slow strain rate tests (SSRT) as a function of solution pH, electrochemical potential and strain rate. Strain rate dependance on SCC susceptibility was remarkable in the corrosion environment in terms of ultimate tensile strength, reduction of area and rupture elongation. Strain rate effects were examined in detail in terms of applied strain rate and local strain rate as well. Local strain rate at necked region after Pmax was much higher than averaged nominal rate at 4.17×10-7 sec-1 and several cracks were observed only at the necked region in the S.S.W.",

author = "Lim, {J. K.} and T. Shoji and Who, {J. W.} and Chung, {S. H.} and H. Takahashi",

year = "1991",

month = jan,

day = "1",

language = "English",

volume = "51-52",

pages = "113--118",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications",

note = "Proceedings of the KSME/JSME Joint Conference ; Conference date: 06-07-1990 Through 07-07-1990",

}

TY - JOUR

T1 - Stress corrosion cracking of high strength steels and their weldments in synthetic sea water

AU - Lim, J. K.

AU - Shoji, T.

AU - Who, J. W.

AU - Chung, S. H.

AU - Takahashi, H.

PY - 1991/1/1

Y1 - 1991/1/1

N2 - SCC susceptibility of three kinds of steel in synthetic seawater was evaluated by slow strain rate tests (SSRT) as a function of solution pH, electrochemical potential and strain rate. Strain rate dependance on SCC susceptibility was remarkable in the corrosion environment in terms of ultimate tensile strength, reduction of area and rupture elongation. Strain rate effects were examined in detail in terms of applied strain rate and local strain rate as well. Local strain rate at necked region after Pmax was much higher than averaged nominal rate at 4.17×10-7 sec-1 and several cracks were observed only at the necked region in the S.S.W.

AB - SCC susceptibility of three kinds of steel in synthetic seawater was evaluated by slow strain rate tests (SSRT) as a function of solution pH, electrochemical potential and strain rate. Strain rate dependance on SCC susceptibility was remarkable in the corrosion environment in terms of ultimate tensile strength, reduction of area and rupture elongation. Strain rate effects were examined in detail in terms of applied strain rate and local strain rate as well. Local strain rate at necked region after Pmax was much higher than averaged nominal rate at 4.17×10-7 sec-1 and several cracks were observed only at the necked region in the S.S.W.

UR - http://www.scopus.com/inward/record.url?scp=0025752069&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025752069&partnerID=8YFLogxK

M3 - Conference article

AN - SCOPUS:0025752069

VL - 51-52

SP - 113

EP - 118

JO - Key Engineering Materials

JF - Key Engineering Materials

SN - 1013-9826

T2 - Proceedings of the KSME/JSME Joint Conference

Y2 - 6 July 1990 through 7 July 1990

ER -