Soot-combustion catalyst of Pd/ZrO2 composites prepared from Zr65Pd35 amorphous alloy by oxidation treatment

Masakuni Ozawa, Atsuhiko Masuda, Maki Nakamura, Masatomo Hattori, Hidemi Kato, Shin ichi Yamamura

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Metal-dispersed Pd/ZrO2 composites were derived from amorphous Zr65Pd35 alloy and their catalytic behavior for diesel soot combustion was studied. X-ray diffractograms and scanning electron micrographs indicated that mixtures of ZrO2 phase and the dispersed metallic phase were formed in the resulting material after heat treatment at 800 °C in air. The oxidized alloy resulted in the enhanced soot combustion activity. The removal property of catalyst, evaluated as temperature, is almost 100 °C better than that in the non-catalyzed reaction. The combustion processes were observed by in situ high temperature optical microscopy (HTOM) and ex situ electron microscopy with different scales. The secondary soot particle started the combustion at the primary soot near catalyst. Upon heating to higher temperature between 570 °C and 590 °C the soot layer rapidly disappeared in in situ HTOM, while both the black band and dispersed part of soot on a alumina substrate remained without combustion even kept at 650 °C. Therefore, soot did not move with micron-order distance and its combustion process should depend on their contact points of catalyst surfaces and soot aggregate. This work provided a new type of catalytic material prepared from amorphous alloys which was effective soot combustion catalysis.

本文言語English
論文番号SAAC06
ジャーナルJapanese journal of applied physics
59
SA
DOI
出版ステータスPublished - 2020 1月 1

ASJC Scopus subject areas

  • 工学(全般)
  • 物理学および天文学(全般)

フィンガープリント

「Soot-combustion catalyst of Pd/ZrO2 composites prepared from Zr65Pd35 amorphous alloy by oxidation treatment」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル