Small-span bending test for determination of elastic-plastic properties of ultrathin Pt wires

Hironori Tohmyoh, M. A.Salam Akanda, Masumi Saka

研究成果: Article

9 被引用数 (Scopus)

抄録

A mechanical testing methodology for determination of elastic-plastic properties of very thin metallic wires using small-span bending under lateral load is described. Sufficient strain is locally developed in the tested section of wire by unsymmetrical bending with two opposite probes where one end of the wire is fixed on a substrate with rigid joint by Joule heat welding. From the load-displacement relationships obtained experimentally, Young's modulus is determined by analytical formulation. Moreover, yield stress and hardening modulus of the wire are identified using an optimization strategy with finite-element analyses. The thin Pt wires with a nominal diameter of about 625 nm are examined by the testing scheme and the wires are found to have higher yield stress compared to bulk Pt.

本文言語English
ページ(範囲)285-291
ページ数7
ジャーナルApplied Physics A: Materials Science and Processing
103
2
DOI
出版ステータスPublished - 2011 5

ASJC Scopus subject areas

  • Chemistry(all)
  • Materials Science(all)

フィンガープリント 「Small-span bending test for determination of elastic-plastic properties of ultrathin Pt wires」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル