Sintering behavior of ni-based metallic glass powder by precise hot pressing

Noriaki Matsubara, Katsu Yanagimoto, Akira Kawasaki

研究成果: Article査読

2 被引用数 (Scopus)

抄録

The compressive behavior and sintering condition of Ni-based metallic glass sintered body produced by precise hot pressing was investigated in this study. Ni-based metallic glass powder prepared by a gas atomizing process was sintered under the condition of processing temperature 863 K, processing pressure 200 MPa, which enabled to achieve sintered bodies of nearly full densification without crystallization. These processing condition were found in previous study using precise hot pressing. The compression test was conducted using amorphous sintered body described above. The compressive strength, Young's modulus, and elastic elongation are 1929 MPa, 94.8GPa, and 0.021, respectively. The amorphous sintered body has high strength and lower Young's modulus than crystalline metals. These compressive characteristics are the same as bulk metallic glass manufactured by casting. Sintering condition of Ni-based metallic glass sintered body was observed using transmission electron microscope. While the contrast was observed in metallic glass powder boundaries, oxides, micro pores, and crystals weren't found, which demonstrated excellent sintering properties obtained by the diffusion mechanism. In addition, the gear-shaped sintered amorphous body was successfully manufactured, showing great potential for various applications in manufacturing.

本文言語English
ページ(範囲)715-719
ページ数5
ジャーナルFuntai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy
55
10
DOI
出版ステータスPublished - 2008 10

ASJC Scopus subject areas

  • Mechanical Engineering
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「Sintering behavior of ni-based metallic glass powder by precise hot pressing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル