Simple and engineered process yielding carbon nanotube arrays with 1.2 × 1013 cm-2 wall density on conductive underlayer at 400 °c

Nuri Na, Dong Young Kim, Yeong Gi So, Yuichi Ikuhara, Suguru Noda

    研究成果: Article査読

    21 被引用数 (Scopus)

    抄録

    A simple process is presented that realizes carbon nanotube (CNT) arrays that meet the process and structure requirements for use in large-scale integrated circuits. Ni particles are formed densely on a conductive TiN layer on SiO2/Si substrates through nucleation and growth by sputtering, which was stopped prior to percolation of the Ni particles. Ni particles as dense as 2.8 × 1012 cm-2 were formed after annealing at 400 °C and chemical vapor deposition (CVD) was carried out at 400 °C by feeding C2H2 at partial pressures as low as 0.13-1.3 Pa so as not to kill the catalyst. Scanning electron microscopy with energy dispersive X-ray spectroscopy revealed the mass density of the arrays to be as high as 1.1 g cm-3. High resolution transmission electron microscopy showed the densely packed CNTs with an average wall number of eight. Atomic force microscopy of the root of the CNT arrays transferred to a SiO2/Si substrate enabled direct counting of individual CNTs, revealing areal densities of CNTs and CNT walls as high as 1.5 × 1012 and 1.2 × 1013 cm-2, respectively. The simple process, using conventional sputtering and CVD apparatus, with carefully engineered conditions offers a route for practical application of CNTs.

    本文言語English
    ページ(範囲)773-781
    ページ数9
    ジャーナルCarbon
    81
    1
    DOI
    出版ステータスPublished - 2015

    ASJC Scopus subject areas

    • Chemistry(all)
    • Materials Science(all)

    フィンガープリント 「Simple and engineered process yielding carbon nanotube arrays with 1.2 × 10<sup>13</sup> cm<sup>-2</sup> wall density on conductive underlayer at 400 °c」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル