Shaking table test on friction behavior between steel column base and base mortar

Masahiro Ikenaga, Takuya Nagae, Jason Mccormick, Mika Katsuo, Masayoshi Nakashima

研究成果: Article

2 引用 (Scopus)

抜粋

Shear friction between the steel base plate and base mortar contributes to the shear resistance of standard column bases. A value of 0.5 is adopted as the coefficient of shear friction in All's design specifications, but the associated background data are limited. To investigate the dynamic shear resistance behavior between the base plate and mortar, a shake table study is undertaken using a large rigid mass supported by steel contact elements that rest on mortar surfaces fixed on the shake table. Horizontal input accelerations are considered for various magnitudes and frequencies. The results provide a constant friction coefficient during sliding with an average value of 0.78. Comparisons with previous test and numerical analysis are also carned out, and good conelation among them is noticed.

元の言語English
ページ(範囲)1185-1191
ページ数7
ジャーナルJournal of Structural and Construction Engineering
73
発行部数629
DOI
出版物ステータスPublished - 2008 7 1

ASJC Scopus subject areas

  • Architecture
  • Building and Construction

フィンガープリント Shaking table test on friction behavior between steel column base and base mortar' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用