Self-healing Corrosion Protection Ability of Composition-Gradient Al 2O3·Nb Nanocomposite Thin Films

Mika Yasuda, Noboru Akao, Nobuyoshi Hara, Katsuhisa Sugimoto

研究成果: Article査読

15 被引用数 (Scopus)

抄録

Al2O3·Nb nanocomposite thin films have been known as films having self-healing corrosion protection ability. To attain high self-healing ability and low pinhole defect density, the optimization of composition and structure of the films has been examined. The films were prepared on an Fe thin film substrate on a glass slide using ion beam sputter deposition technique. The self-healing ability of the films was evaluated by the repassivation behavior of potential and current of specimens coupled with an Au auxiliary electrode just after scratching by a knife edge in 0.1 M NaCl. Microscopic observation showed that the pinhole defect density increased with increasing Nb content. Therefore, to use the films as corrosion-protection coatings, decreasing Nb content would be needed for decreasing pinhole defect density but increasing Nb content for increasing self-healing ability. To solve this contradiction, composition-gradient Al2O3· Nb films were introduced. The composition-gradient film with increasing Nb content from the film surface to the substrate interface showed low pinhole defect density and high self-healing ability. A three-layer film of Al 2O3 (outer)/composition-gradient Al2O 3 · Nb (middle)/Nb (inner) gave the best result.

本文言語English
ページ(範囲)B481-B487
ジャーナルJournal of the Electrochemical Society
150
10
DOI
出版ステータスPublished - 2003 10月 1

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 再生可能エネルギー、持続可能性、環境
  • 表面、皮膜および薄膜
  • 電気化学
  • 材料化学

フィンガープリント

「Self-healing Corrosion Protection Ability of Composition-Gradient Al 2O3·Nb Nanocomposite Thin Films」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル