Selective Reduction of Phosphorus from Manganese Ore to Produce Ferromanganese Alloy with Low Phosphorus Content

Dong Jun Shin, Xu Gao, Shigeru Ueda, Shin ya Kitamura

研究成果: Article査読

1 被引用数 (Scopus)

抄録

The authors proposed the selective reduction of P from steelmaking slag to enable the recycling of steelmaking slag for the sintering process, and for the extraction of P and Mn separately. By decreasing the basicity of the slag and increasing the temperature of the reduction, Fe and P were reduced to the metal, while most of the Mn remained in the slag. In this study, this selective reduction technique was applied to a kind of Mn ore to remove P. The influences of the different mixing ratios of graphite, SiO2, and pig iron as well as the temperature on the reduction behavior were investigated. By adding SiO2 as a slag modifier to produce an acidic slag with a low melting temperature and adding graphite and pig iron as a reductant and receiver, respectively, the selective reduction of P without the reduction of Mn was achieved for Mn ore. When the slag obtained after the selective reduction of Mn ore was used in the smelting reduction process to produce the ferromanganese alloy, a significant decrease in the P content of ferromanganese was estimated through a mass balance calculation. Therefore, the selective reduction of P from Mn ore has the potential to produce high-grade ferromanganese alloys with low P content.

本文言語English
ページ(範囲)362-377
ページ数16
ジャーナルJournal of Sustainable Metallurgy
5
3
DOI
出版ステータスPublished - 2019 9 15

ASJC Scopus subject areas

  • 環境科学(その他)
  • 材料力学
  • 金属および合金

フィンガープリント

「Selective Reduction of Phosphorus from Manganese Ore to Produce Ferromanganese Alloy with Low Phosphorus Content」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル