Result of international round robin test on young's modulus measurement of 304L and 316L steels at cryogenic temperatures

K. Shibata, T. Ogata, A. Nyilas, R. P. Walsh, M. F. Millet, Y. Shindo, H. Fujii, K. Ishio, H. Nakajima, H. Mitterbacher, V. J. Toplosky, S. Ohmiya, K. Takano, P. Gigante

研究成果: Conference contribution

抜粋

Ogata et al. reported in 1996 results of international Round Robin tests on mechanical property measurement of several metals at cryogenic temperatures. Following the report, the standard deviation of Young's modulus of 316L steel is much larger than those of yield and tensile strengths, that is, 4.6 % of the mean value for Young's modulus, while 1.4 % and 1.6 % of the mean values for yield and for tensile strengths, respectively. Therefore, an international Round Robin test on Young's modulus of two austenitic stainless steels at cryogenic temperatures under the participation often institutes from four nations has been initiated within these two years. As a result, the ratios of standard deviation to the mean values are 4.2 % for 304L and 3.6 % for 316L. Such a drop in the standard deviation is attributable to the decrease in the number of institute owing to the application of single extensometer or direct strain gage technique.

元の言語English
ホスト出版物のタイトルADVANCES IN CRYOGENIC ENGINEERING
ホスト出版物のサブタイトルTransactions of the International Cryogenic Materials Conference, ICMC, Volume 52A
ページ91-98
ページ数8
DOI
出版物ステータスPublished - 2006 3 31
イベントADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC - Keystone, CO, United States
継続期間: 2005 8 292005 9 2

出版物シリーズ

名前AIP Conference Proceedings
824 I
ISSN(印刷物)0094-243X
ISSN(電子版)1551-7616

Other

OtherADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC
United States
Keystone, CO
期間05/8/2905/9/2

ASJC Scopus subject areas

  • Physics and Astronomy(all)

フィンガープリント Result of international round robin test on young's modulus measurement of 304L and 316L steels at cryogenic temperatures' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Shibata, K., Ogata, T., Nyilas, A., Walsh, R. P., Millet, M. F., Shindo, Y., Fujii, H., Ishio, K., Nakajima, H., Mitterbacher, H., Toplosky, V. J., Ohmiya, S., Takano, K., & Gigante, P. (2006). Result of international round robin test on young's modulus measurement of 304L and 316L steels at cryogenic temperatures. : ADVANCES IN CRYOGENIC ENGINEERING: Transactions of the International Cryogenic Materials Conference, ICMC, Volume 52A (pp. 91-98). (AIP Conference Proceedings; 巻数 824 I). https://doi.org/10.1063/1.2192338