Residual stress analysis of cold-drawn pearlite steel wire using white synchrotron radiation

Masayoshi Kumagai, Shigeo Sato, Shigeru Suzuki, Muneyuki Imafuku, Hitoshi Tashiro, Shin Ichi Ohya

研究成果: Article査読

2 被引用数 (Scopus)

抄録

Measurement of the residual stresses in cold-drawn pearlitic steel wire was conducted using an energy dispersive X-ray diffraction technique. The residual stresses of the ferrite and cementite phases were determined for different crystal orientations and large residual stresses were found to exist in the colddrawn pearlitic steel wire. The residual stresses in the ferrite phase were compressive in the axial direction but nearly zero in the hoop and radial directions. In addition, the residual stresses of the reflection indices for the ferrite phase were similar to one another. For the cementite phase, while tensile residual stress existed in the axial direction, compressive residual stress existed in the hoop and radial directions. These stresses in the ferrite phase in the axial direction and cementite phase in all directions decreased along the radial positions. A residual stress state model was proposed on the basis of the aligned lamellar structure along the drawing direction; the model explains the effect of the lamellar direction on residual stress. Reanalysis of the wire sample using the proposed model provided residual strains and stresses in the lamellar direction that were different from the average values estimated using the simple stress analysis method.

本文言語English
ページ(範囲)1489-1495
ページ数7
ジャーナルIsij International
55
7
DOI
出版ステータスPublished - 2015

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 金属および合金
  • 材料化学

フィンガープリント

「Residual stress analysis of cold-drawn pearlite steel wire using white synchrotron radiation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル