Recycle of inorganic wastes by hydrothermal technology

Mikihiro Oida, Hiroki Maenami, Norifumi Isu, Hideki Ishida

研究成果: Conference contribution

抄録

In order to build up a sustainable society, the authors have investigated the recycling technology of inorganic wastes with low energy consumption. Sewage sludge ash, concrete waste, and construction sludge were used as raw materials. These waste were mixed with Ca(OH)2 and formed by uniaxial pressing. The specimens were autoclaved for 6 h at 180°C under saturated steam pressure. The flexural strength of the specimens varied from 3.2 to 9.4 MPa with the bulk density of 1200 to 1550 kg/m3. The strength development was caused by filling of the initial void among the particles with tobermorite (Ca5(Si6O18H2)·4H 2O) and hydrogarnet (Ca3Al2(SiO 4)(OH)8) formed by hydrothermal treatment. To apply these solidified inorganic waste to paving tile, we determined that Ca(OH) 2/wastes mass ratio is 15/85 for plant production condition. The paving tile had comparable performance with brick, block and concrete pavement.

本文言語English
ホスト出版物のタイトルProceedings - Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005
ページ304-305
ページ数2
DOI
出版ステータスPublished - 2005 12 1
イベント4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005 - Tokyo, Japan
継続期間: 2005 12 122005 12 14

出版物シリーズ

名前Proceedings - Fourth International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005
2005

Other

Other4th International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Eco Design 2005
CountryJapan
CityTokyo
Period05/12/1205/12/14

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント 「Recycle of inorganic wastes by hydrothermal technology」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル