Production of pure tantalum by a combination process of carbon reduction smelting and hydrogen plasma arc melting-refining

Kouji Mimura, Michio Nanjo

研究成果: Article査読

1 被引用数 (Scopus)

抄録

In this work, deoxidation and decarburization of crude tantalum prepared by carbon reduction of Ta$-2$O5 with Ar plasma arc heating has been investigated by using H2-Ar plasma arc melting. The oxygen and carbon contents obtained by carbon reduction smelting are dependent on the carbon to Ta2O5 mixing mole ratio, and the product of (%O) and (%C) in each tantalum is almost constant. Therefore, the carbon/oxygen ratio in tantalum can be adjusted by changing the C/Ta2O5 ratio for the refining process that follows. At the subsequent stage of H2-Ar plasma arc melting, oxygen in tantalum can be quickly liberated but carbon is scarcely removed. As a result, ductile tantalum whose sum of oxygen and carbon is less than 100 mass ppm can be produced by the deoxidation effect of H2-Ar plasma arc melting for a high oxygen- and low carbon-bearing tantalum. Deoxidation is mainly caused by dissociated and activated hydrogen atoms in the H2-Ar plasma gas.

本文言語English
ページ(範囲)843-851
ページ数9
ジャーナルNippon Kinzoku Gakkai-si
52
9
出版ステータスPublished - 1988 9月 1

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Production of pure tantalum by a combination process of carbon reduction smelting and hydrogen plasma arc melting-refining」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル