Precise patterning of Si O2 -based glass by low-temperature nanoimprint lithography assisted by UV irradiation on both faces using Glasia as a precursor

Motoki Okinaka, Hiroshi Tsushima, Yoshifumi Ichinose, Emi Watanabe, Keiichi Yanagisawa, Kazuhito Tsukagoshi, Yoshinobu Aoyagi

研究成果: Article査読

5 被引用数 (Scopus)

抄録

Precise patterning of glass has been achieved by low-temperature nanoimprint lithography using Glasia as a precursor. The main constitute of the Glasia is polysilane polymer. The polysilane with a simple structure enables the rapid patterning of line and space structures ranging from 50 nm to 25 μm and air-hole structures with a high aspect ratio of 5 at temperatures lower than 80 °C. UV irradiation on both faces transforms the polysilane into Si O2 -based glass and improves the properties of glass through photo-oxidation. The patterned structure baked at 250 °C shows no shrinkage. It is suggested that the incorporation of the oxygen into the patterned film during heat treatment minimizes the shrink due to the evaporation of organic side chains. The patterned Si O2 -based glass material withstands ultrasonication in acetone, and has about twice the Vickers hardness of poly(methylmethacrylate) (PMMA).

本文言語English
ページ(範囲)1393-1397
ページ数5
ジャーナルJournal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures
25
4
DOI
出版ステータスPublished - 2007
外部発表はい

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント 「Precise patterning of Si O2 -based glass by low-temperature nanoimprint lithography assisted by UV irradiation on both faces using Glasia as a precursor」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル