Precise measurements and their analysis of GAWBS-induced depolarization noise in various optical fibers for digital coherent transmission

研究成果: Article査読

1 被引用数 (Scopus)

抄録

We undertake precise measurements of guided acoustic wave Brillouin scattering (GAWBS) depolarization noise caused by the TR2,m mode (torsional and radial mode) in various fibers and analyze the results. And we describe the influence of the noise on digital coherent transmission. We first show that the TR2,m mode is distributed over a wider bandwidth when the effective core area Aeff of the fiber is smaller. We then describe the strong mode-number dependence of the depolarization power generated from the profile of the refractive index change induced by the TR2,m mode. We also use two methods to measure the polarization crosstalk (XT) induced by the depolarization, namely, a direct detection method with a photodiode and a conventional power detection method with an optical spectrum analyzer. The results of the two methods agree well, and the XT increase is inversely proportional to the fiber Aeff and proportional to fiber length. Finally, we evaluate the influence of the GAWBS-induced XT on the BER characteristics in a coherent QAM transmission, where we find that the influence of the TR2,m mode is much weaker than that of the R0,m mode (radial mode). That is, the error-free transmission distance in standard single-mode fiber is extended to 8600 km for 256 QAM signal assuming hard-decision FEC with a 7% overhead. This distance is seven times longer than that obtained with the R0,m mode.

本文言語English
ページ(範囲)34422-34433
ページ数12
ジャーナルOptics Express
28
23
DOI
出版ステータスPublished - 2020 11 9

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics

フィンガープリント 「Precise measurements and their analysis of GAWBS-induced depolarization noise in various optical fibers for digital coherent transmission」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル