TY - JOUR
T1 - PHASE TRANSFORMATION AND HEAT TRANSFER DURING COOLING STEEL.
AU - Taniguchi, Shoji
AU - Murakami, Toshiyuki
AU - Watanabe, Atsushi
AU - Kikuchi, Atsushi
N1 - Copyright:
Copyright 2017 Elsevier B.V., All rights reserved.
PY - 1988
Y1 - 1988
N2 - Hypereutectoid steel, eutectoid steel and hypoeutectoid steel were used. Heat transfer coefficients necessary for the analysis of heat transfer were obtained by analyzing the cooling curve of a copper disk. These values could be used for the prediction of cooling curves of stainless steel. In the case of carbon steels, the heat generation by phase transformation is accounted for in a one-dimensional heat conduction equation. The fractions of various phases such as austenite, martensite, bainite, ferrite and pearlite were estimated by use of a continuous cooling transformation diagram (CCT diagram).
AB - Hypereutectoid steel, eutectoid steel and hypoeutectoid steel were used. Heat transfer coefficients necessary for the analysis of heat transfer were obtained by analyzing the cooling curve of a copper disk. These values could be used for the prediction of cooling curves of stainless steel. In the case of carbon steels, the heat generation by phase transformation is accounted for in a one-dimensional heat conduction equation. The fractions of various phases such as austenite, martensite, bainite, ferrite and pearlite were estimated by use of a continuous cooling transformation diagram (CCT diagram).
UR - http://www.scopus.com/inward/record.url?scp=0023964192&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0023964192&partnerID=8YFLogxK
U2 - 10.2355/tetsutohagane1955.74.2_318
DO - 10.2355/tetsutohagane1955.74.2_318
M3 - Article
AN - SCOPUS:0023964192
SN - 0021-1575
VL - 74
SP - 318
EP - 325
JO - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
JF - Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
IS - 2
ER -