On-machine measurement and statistical analysis of wheel wear after grinding optical glass

Peng Yao, Takeshi Matsuda, Tianfeng Zhou, Jiwang Yan, Tsunemoto Kuriyagawa, Yadong Gong

研究成果: Conference contribution

抜粋

On-machine measurement and statistical analysis of wheel topography are important for real-time monitoring the wheel condition during grinding and predicting the performance of grinding process. In this paper, the surface topographies of grinding wheel in the different stages of the grinding of fused silica and BK7weremeasured with a white light interferometer, which was set on the surface grinder. Height parameters of 3D surface roughness were proposed to evaluate the wheel wear. Wheel wear mechanisms were essentially determined by analyzing the different material removal modes of optical glasses. Grinding of BK7 mainly causes severe attritious wear of grains, while grinding fused silica, self-sharpening effect makes grinding sustain for a long time.

元の言語English
ホスト出版物のタイトルAdvances in Abrasive Technology XIV
ページ653-658
ページ数6
DOI
出版物ステータスPublished - 2011
イベント14th International Symposium on Advances in Abrasive Technology, ISAAT 2011 - Stuttgart, Germany
継続期間: 2011 9 182011 9 21

出版物シリーズ

名前Advanced Materials Research
325
ISSN(印刷物)1022-6680

Other

Other14th International Symposium on Advances in Abrasive Technology, ISAAT 2011
Germany
Stuttgart
期間11/9/1811/9/21

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント On-machine measurement and statistical analysis of wheel wear after grinding optical glass' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Yao, P., Matsuda, T., Zhou, T., Yan, J., Kuriyagawa, T., & Gong, Y. (2011). On-machine measurement and statistical analysis of wheel wear after grinding optical glass. : Advances in Abrasive Technology XIV (pp. 653-658). (Advanced Materials Research; 巻数 325). https://doi.org/10.4028/www.scientific.net/AMR.325.653