Nitrogen absorption of Fe-Cr and Fe-Ni weld metals during gas tungsten arc welding

Takeshi Kuwana, Hiroyuki Kokawa, Ken ichiro Naitoh

研究成果: Article査読

抄録

Fe-Cr and Fe-Ni alloy sheets were welded by gas tungsten are welding in an arc atmosphere-controlled chamber filled with argon-nitrogen gas mixtures in order to study effects of chromium and nickel on the nitrogen absorption of iron alloy weld metal. In Fe-Cr alloys, the nitrogen content of weld metal decreases with increasing welding current. In Fe-Ni alloys, the nitrogen content of weld metal hardly depends on the welding current. In each alloy, the nitrogen content of weld metal increases with the nitrogen partial pressure of the atmosphere in the low nitrogen partial pressure region, and is constant with nitrogen partial pressure more than 0.01MPa. The nitrogen content of weld metal increases with chromium content and decreases slightly with increasing nickel content. The nitrogen absorption of iron alloy weld metals is discussed thermodynamically by comparing data of arc melting and equilibrium.

本文言語English
ページ(範囲)3-9
ページ数7
ジャーナルYosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society
7
2
出版ステータスPublished - 1989 5月 1

ASJC Scopus subject areas

  • 材料力学
  • 機械工学
  • 表面、皮膜および薄膜
  • 金属および合金

フィンガープリント

「Nitrogen absorption of Fe-Cr and Fe-Ni weld metals during gas tungsten arc welding」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル