Neutron diffraction study on prebending effects for bronze route Nb 3Sn wires without reinforcement

Satoshi Awaji, Hidetoshi Oguro, Gen Nishijima, Petre Badica, Kazuo Watanabe, Stefanus Harjo, Takashi Kamiyama, Kazumune Katagiri

研究成果: Article査読

19 被引用数 (Scopus)

抄録

The critical current, upper critical field and critical temperature of bronze route Nb3Sn commercial wires are enhanced by applying a repeated bending strain at room temperature, i.e., "prebending strain". In order to investigate the prebending effects from a viewpoint of a residual strain, axial and lateral residual strains were evaluated directly by neutron diffraction at room temperature. We found that the axial residual strain changes from -0.10% to 0.02 % but the lateral one is unchanged by applying a prebending strain of 0.5 % for an ordinary bronze route (Nb, Ti) 3Sn wires without reinforcement. Hence, in the case of the ordinary Nb3Sn wires without reinforcement, the prebending treatment modifies only the axial residual strain states independently to the lateral one, although it may depend on the wire structure. The critical current properties under the axial tensile strain suggest that the axial residual strain is reduced by about 0.11% but the radial residual strain unchanged by the prebending treatment of 0.5%. This is consistent with the results of the neutron diffraction.

本文言語English
論文番号1643071
ページ(範囲)1228-1231
ページ数4
ジャーナルIEEE Transactions on Applied Superconductivity
16
2
DOI
出版ステータスPublished - 2006 6

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

フィンガープリント 「Neutron diffraction study on prebending effects for bronze route Nb <sub>3</sub>Sn wires without reinforcement」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル