Nano icosahedral quasicrystalline phase in Zr65Al7.5Ni10Ag17.5 quaternary glassy alloy

J. Saida, M. Matsushita, A. Inoue

研究成果: Article査読

6 被引用数 (Scopus)

抄録

A nano icosahedral quasicrystalline phase was confirmed as the primary precipitation phase in the melt-spun Zr65Al7.5Ni10Ag17.5 quaternary glassy alloy with a two-stage crystallization process. The onset temperature of the first exothermic peak is 704 K at a heating rate of 0.67 Ks-1. Although no significant X-ray diffraction peaks were observed in the sample annealed at 705 K, we confirmed the formation of the icosahedral phase by nano beam electron diffraction using FE-TEM. The icosahedral particles have an extremely fine grain size in the diameter range of 2 to 4 nm. In addition to the icosahedral phase, the nano crystalline particles corresponding to Zr2Ag and/or fcc-Zr2Ni structures are also observed in the annealed sample. The second exothermic peak denotes the transition from the nano icosahedral to the crystalline phase of Zr2Ag, fcc-Zr2Ni and Zr4Al3. The formation of the nano icosahedral phase as the primary phase is due to a high nucleation rate and strongly implies the existence of an icosahedral short-range order in the glassy state.

本文言語English
ページ(範囲)1493-1496
ページ数4
ジャーナルMaterials Transactions
42
8
DOI
出版ステータスPublished - 2001
外部発表はい

ASJC Scopus subject areas

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Nano icosahedral quasicrystalline phase in Zr<sub>65</sub>Al<sub>7.5</sub>Ni<sub>10</sub>Ag<sub>17.5</sub> quaternary glassy alloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル