Morphology and crystallography of α precipitates in β Ti-Mo binary alloys

T. Furuhara, T. Makino, Y. Idei, H. Ishigaki, A. Takada, T. Maki

研究成果: Article査読

62 被引用数 (Scopus)

抄録

The morphology and crystallography of α(hcp) precipitates formed in the α(bcc) matrix were examined in the Ti-Mo binary alloys with various Mo contents below the currently proposed monotectoid temperature by means of transmission electron microscopy. In the Ti-10, 20 and 30 mass%Mo alloys, a precipitates form on β grain boundaries and grow into the interior of β grains. An α precipitate_ formed intragranularly is lath-shaped, and has the Burgers orientation relationship, ((110)β//(0001)α, [111]β//[1120]α) with respect to its β matrix. The habit plane of α lath is near {111}β. In the Ti-40 mass%Mo alloy, a fine α phase distribution, probably due to the prior β phase separation, was observed below 823 K although non-uniform α precipitation on β grain boundaries and dislocations occurs above 873 K. An α precipitate has the near-Potter orientation relationship ((011)β//(1101)α, [111]β//[1120]α), and is plate-shaped with the {013}β habit plane. The validity of the Ti-Mo phase diagram currently proposed is discussed in terms of the coherent phase separation of β phase and the equilibrium volume fraction of α phase. It is concluded that the region where β phase separation occurs should be present in the much lower temperature range than the currently proposed Ti-Mo binary phase diagram.

本文言語English
ページ(範囲)31-39
ページ数9
ジャーナルMaterials Transactions, JIM
39
1
DOI
出版ステータスPublished - 1998 1月
外部発表はい

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Morphology and crystallography of α precipitates in β Ti-Mo binary alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル