Model deformation corrections of NASA common research model using computational fluid dynamics

Kanako Yasue, Makoto Ueno

研究成果: Article査読

10 被引用数 (Scopus)

抄録

Computational fluid dynamics-aided wind-tunnel data corrections for the static model deformation effect of the NASA-Common Research Model are performed for wind-tunnel data obtained at the 2 m x 2 m Transonic Wind Tunnel of Japan Aerospace Exploration Agency, the National Transonic Facility, and the European Transonic Wind Tunnel. Although it is important to use the same configuration when comparing wind-tunnel data obtained at various facilities, this has not yet been performed with an appropriate validation. In this paper, the model deformation effects are estimated from the difference between the computational fluid dynamics results for a designed configuration and that for a deformed configuration considering support systems. Initially, the techniques for the model deformation correction are validated with two sets of National Transonic Facility wind-tunnel data at a Reynolds number of 20 × 106 with different dynamic pressures. Then, the validated model deformation corrections are performed on the wind-tunnel data obtained at the Transonic Wind Tunnel, National Transonic Facility, and European Transonic Wind Tunnel. Differences in the drag coefficients among the three sets of wind-tunnel data fall within about 10 drag counts for the model deformation corrections and the Reynolds number corrections applied to the Transonic Wind Tunnel data to align the Reynolds number to 5 × 106.

本文言語English
ページ(範囲)951-961
ページ数11
ジャーナルJournal of Aircraft
53
4
DOI
出版ステータスPublished - 2016 7 1
外部発表はい

ASJC Scopus subject areas

  • 航空宇宙工学

フィンガープリント

「Model deformation corrections of NASA common research model using computational fluid dynamics」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル