Microstructure and properties of friction stir welded high strength Fe-36wt%Ni alloy

Yue Zhao, Yutaka S. Sato, Hiroyuki Kokawa, Aiping Wu

研究成果: Article査読

46 被引用数 (Scopus)

抄録

High strength Fe-36. wt%Ni alloy sheets with 3. mm thickness were successfully friction stir welded and defect-free welds were acquired at travelling speed of 2. mm/s and rotational speed between 600 and 1000. rpm. Essentially, the friction stir welding process did not change the excellent thermal expansion properties of Fe-36. wt%Ni alloy. Friction stir welding resulted in a uniform coarser-grained microstructure in the stir zone with comparable fractions of low angle boundaries and Σ3 twin boundaries to the base material. However, approximate 10% reductions of hardness and tensile strength were found in the joint. The relationship between grain size and mechanical properties of friction stir welds was discussed. The base material has higher mechanical properties, not only because of the finer average grain size, but also attribute to its inhomogeneous grain structure.

本文言語English
ページ(範囲)7768-7773
ページ数6
ジャーナルMaterials Science and Engineering A
528
25-26
DOI
出版ステータスPublished - 2011 9月 25

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Microstructure and properties of friction stir welded high strength Fe-36wt%Ni alloy」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル