Microstructure and mechanical properties of Hot-Pressed Co-Cr-Mo alloy compacts

Yoshimi Sato, Naoyuki Nomura, Shigeo Fujinuma, Akihiko Chiba

研究成果: Conference article査読

8 被引用数 (Scopus)

抄録

The microstructure and mechanical properties of compacts produced from hot-pressing the Co-29Cr-6Mo alloy powder, fabricated by gas atomization, were investigated in this study. The average diameter of the alloy powder is 41 μm. Electron probe micro analysis revealed that the concentration scattering of chromium and molybdenum is relatively small between the powders. The compact hot-pressed at 1273 K in Ar with an applied pressure of 80 MPa possesses the relative density of 97% and the fine grain (2.7 μm). The ultimate tensile strength of the compact is 1240 MPa, which is comparable to that of the forged Co-29Cr-6Mo alloy.

本文言語English
ページ(範囲)769-772
ページ数4
ジャーナルAdvanced Materials Research
24-25
DOI
出版ステータスPublished - 2007 1 1
イベントPRICM 6: The 6th Pacific Rim International Conference on Advanced Materials and Processing - Jeju Island, Korea, Republic of
継続期間: 2007 11 52007 11 9

ASJC Scopus subject areas

  • Engineering(all)

フィンガープリント 「Microstructure and mechanical properties of Hot-Pressed Co-Cr-Mo alloy compacts」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル