Mechanical properties of MgB 2 superconducting wires fabricated by internal Mg diffusion process

G. Nishijima, S. J. Ye, A. Matsumoto, K. Togano, H. Kumakura, H. Kitaguchi, H. Oguro

研究成果: Article査読

25 被引用数 (Scopus)

抄録

Mechanical properties of MgB 2 monocore superconducting wires fabricated by an internal Mg diffusion (IMD) process and a powder-in-tube (PIT) process were investigated. The uniaxial tensile strain dependence of critical current (I c) and the transverse compressive stress dependence of I c were investigated at 4.2K, 10T. The IMD-processed MgB 2 wire showed a large irreversibility tensile strain limit ( irr=0.67%) and transverse compressive stress tolerance of 206MPa, whereas the PIT-processed wire had 0.51% and 160MPa. Furthermore, the tensile strain sensitivity of I c for the IMD-MgB 2 wire was smaller than that for the PIT-MgB 2 wire. Consequently, mechanical properties of IMD-processed MgB 2 superconducting wires are better than those of PIT-processed wires.

本文言語English
論文番号054012
ジャーナルSuperconductor Science and Technology
25
5
DOI
出版ステータスPublished - 2012 5 1

ASJC Scopus subject areas

  • Ceramics and Composites
  • Condensed Matter Physics
  • Metals and Alloys
  • Electrical and Electronic Engineering
  • Materials Chemistry

フィンガープリント 「Mechanical properties of MgB <sub>2</sub> superconducting wires fabricated by internal Mg diffusion process」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル