Measurement of directionality in carbon fiber reinforced plastic composite with eddy current testing

Jun Cheng, Cheng Yu, Shuai Xu, Jinhao Qiu, Toshiyuki Takagi, Dezhang Xu

研究成果: Article査読

抄録

In carbon fiber reinforced plastic (CFRP) composite, the alignment of continuous carbon fibers guides the directional flow of eddy currents, which is beneficial to the structural and damage detection. In this study, for the purpose of impact damage repair, the transmitter-receiver (T-R) and the flat-tangent eddy current probes are used to determine the fiber orientations and stacking sequence in the CFRP laminate by surface scanning. Theoretical analysis shows that the T-R probe can flexibly pick up the magnetic field generated by the stretched eddy current in CFRP layers. In the meanwhile, the flat-tangent probe possesses layer selective characteristics. By calculating the fiber distribution images of individual directions based on two-dimensional fast Fourier transform (2D-FFT) and comparing the order of pixel intensity values of these images, the fiber orientation and the stacking sequence in the laminate plates can be obtained simultaneously, which provides guidance for damage detection and repair of the CFRP structures.

本文言語English
ページ(範囲)1207-1215
ページ数9
ジャーナルInternational Journal of Applied Electromagnetics and Mechanics
64
1-4
DOI
出版ステータスPublished - 2020

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 材料力学
  • 機械工学
  • 電子工学および電気工学

フィンガープリント

「Measurement of directionality in carbon fiber reinforced plastic composite with eddy current testing」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル