Measurement of concentrations of tramp elements in shredder scrap and Automobile Shredder Residue (ASR) and their mass balance analyses

Yasunari Matsuno, Yuma Igarashi, Seiichi Hayashi, Masaaki Tsuruoka, Kazumi Otabe, Tetsuya Nagasaka

研究成果: Article査読

1 被引用数 (Scopus)

抄録

Contamination of undesirable tramp metals in steel scraps from end-of-life vehicles has been of interest for many years. In this work, typical 5 mini-vehicles and 5 small-size passenger cars were dismantled and put into shredder process, in which most of the parts end-of-life vehicles were removed thoroughly before shredding process. The weights of removed parts, shredder scrap, separated non-ferrous metals and automobile shredder residue (ASR) were measured to figure out the mass balances of the end-of-life vehicles. Then, the concentration of Cu, Cr, Sn in shredder scraps and ASRs were measured. It was found that the concentrations of Cu, Cr, Sn in shredder scrap were 0.078%, 0.004%, 0% for mini-vehicles, and 0.08%, 0.015%, 0.001% for small-size passenger cars. On the other hand, relatively high concentrations of Cu, Cr, Sn in ASR were observed, which was 0.42-0.85%, 0.03-0.04%, 0.05-0.06% for mini-vehicles, and 0.59-0.74%, 0.02%, 0.04-0.15% for small-size passenger cars, respectively. It was found that most of Cu contained in the end-of-life vehicles were removed before shredding process.

本文言語English
ページ(範囲)330-335
ページ数6
ジャーナルTetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan
93
4
DOI
出版ステータスPublished - 2007 4月

ASJC Scopus subject areas

  • 凝縮系物理学
  • 物理化学および理論化学
  • 金属および合金
  • 材料化学

フィンガープリント

「Measurement of concentrations of tramp elements in shredder scrap and Automobile Shredder Residue (ASR) and their mass balance analyses」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル