Map of low-frequency stick-slip of a creep groan

Z. Fuadi, S. Maegawa, K. Nakano, Koshi Adachi

研究成果: Article査読

35 被引用数 (Scopus)

抄録

Amapthat shows the necessary condition for avoiding the generation of low-frequency stick-slip of a creep groan is introduced. The map is obtained as a result of comprehensive investigation employing a novel caliper-slider experimental model. According to the map, creep groan generation is controlled by two dimensionless parameters, designated as stiffness ratio, Sr, and low-frequency stick-slip index, Ls. Stiffness ratio, Sr, is the ratio of structure stiffness to the stiffness at contact interface and Ls is an index formed by various parameters such as normal force, sliding velocity, and difference between static and kinetic coefficients of friction. On the experimental model, creep groan generation can be avoided if one or both of the following conditions is fulfilled: (a) stiffness ratio, Sr, larger than 40 (Sr > 40) and/or (b) low-frequency stick-slip, Ls, index larger than 400 (Ls index > 400). It is expected that the map can be used as a useful guideline for avoiding the generation of similar phenomenon on a real brake system.

本文言語English
ページ(範囲)1235-1246
ページ数12
ジャーナルProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
224
12
DOI
出版ステータスPublished - 2010 12月 1

ASJC Scopus subject areas

  • 機械工学
  • 表面および界面
  • 表面、皮膜および薄膜

フィンガープリント

「Map of low-frequency stick-slip of a creep groan」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル