Magneto-Impedance of Micromachined Thin Films Less Than 100 \mum in Length

Hiroaki Kikuchi, Takuya Shima, Hiroaki Uetake, Shin Yabukami

研究成果: Article査読

5 被引用数 (Scopus)

抄録

Thin-film type magneto-impedance (MI) elements having widths and thicknesses of several micrometers and lengths less than 100 μm in a rectangular shape were fabricated to reduce the demagnetizing effect. Triangular-type MI elements with sensing parts less than 100 μm in length were also fabricated to facilitate near-field detection with a higher spatial resolution. Rectangular-type elements with widths and lengths of 2 μm and 30 μm, respectively, demonstrate a typical MI profile, whereas an element with a 1 μm width shows a discontinuous impedance change and hysteresis due to incomplete anisotropy control. For the triangular elements, we can suppress the distribution of the demagnetizing factor in the sensing part of the elements and obtain typical MI profiles for 30-100 μm lengths.

本文言語English
論文番号7582428
ジャーナルIEEE Magnetics Letters
7
DOI
出版ステータスPublished - 2016
外部発表はい

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料

フィンガープリント

「Magneto-Impedance of Micromachined Thin Films Less Than 100 \mum in Length」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル