Loss of fine airborne particles flowing through the tubes of different materials

Y. Y. Liu, H. Kamiya, A. Ohuchi, Y. Y. Li

研究成果: Conference article査読

抄録

Long-term exposure to airborne particles may cause potential damage to human health. Until now, many monitoring instruments have been developed, but the loss of airborne particles within the measurement systems has rarely been mentioned. This work was to investigate the loss of particles (10∼487nm) when they flowed through stainless, Nylon, Teflon and Tygon tubes, respectively, with carrier gas. Number concentrations of the airborne particles were observed with a Scanning Mobility Particle Sizer (SMPS). Results show that the difference of the size distribution of NaCl particles that were generated by electrically heating and flowed through stainless, Nylon and Teflon tubes was less significant, but the number concentrations were all higher than that through Tygon one. While monitoring indoor airborne particles, no significant particle loss could be observed no matter what tube we used. Tube hardness and the temperature of the carrier gas are considered to be two important factors that influence the losses of airborne particles.

本文言語English
ページ(範囲)449-453
ページ数5
ジャーナルECS Transactions
59
1
DOI
出版ステータスPublished - 2014
イベント2014 Electrochemical Conference on Energy and the Environment, ECEE 2014 - Shanghai, China
継続期間: 2014 3 132014 3 16

ASJC Scopus subject areas

  • 工学(全般)

フィンガープリント

「Loss of fine airborne particles flowing through the tubes of different materials」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル