Interaction between B4C, 304 stainless steel, and Zircaloy-4 in H2O/H2 atmosphere at 1473 K

Xu Gao, Ryosuke Sasaki, Lichun Zheng, Shigeru Ueda, Sun joong Kim, Shin ya Kitamura, Yoshinao Kobayashi

研究成果: Article査読

7 被引用数 (Scopus)

抄録

The control blade and the fuel rod installed in channel box melt in steam during severe accident of a boiling water reactor. In order to clarify the melting phenomena and relocation of the structural material in the core of the reactor, interaction and melting behavior among B4C, 304 grade of stainless steel (SST), and Zircaloy-4 in atmosphere containing H2/H2O at 1473 K are investigated. The results showed that the reaction at the interface between B4C and SST under H2O atmosphere was slow and an oxidation was observed after 3600 s. Under H2O/H2 atmosphere, the concentration of B and C in the SST increased and the SST melted. Despite the atmosphere, an oxide layer formed on the surface of Zircaloy-4, and thus the reactions proceeded slowly when the Zircaloy-4 was contacted with B4C and SST. Under H2O atmosphere, continuous oxidation happened to SST, and SST was partially melted. Under H2 atmosphere, the SST was also melted due to the diffusion of B and C from the B4C. In addition, the oxidation of B4C affected the oxidation behavior of SST and Zircaloy, and thus the oxidation and the hydroxylation of B4C in a severe accident was discussed thermodynamically.

本文言語English
ページ(範囲)400-409
ページ数10
ジャーナルjournal of nuclear science and technology
55
4
DOI
出版ステータスPublished - 2018 4 3

ASJC Scopus subject areas

  • 核物理学および高エネルギー物理学
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Interaction between B<sub>4</sub>C, 304 stainless steel, and Zircaloy-4 in H<sub>2</sub>O/H<sub>2</sub> atmosphere at 1473 K」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル