Influence of workpiece materials on the characteristics of the layers by electrical discharge coating

Nobuyuki Sumi, Chihiro Kato, Masayoshi Mizutani, Tsunemoto Kuriyagawa

研究成果: Paper査読

抄録

We investigated influence of iron-based workpiece materials on the characteristics of the Si layers by electrical discharge coating. It was found that the chemical elements of the precipitations were uniformly dispersed in the layer on the workpiece containing the precipitations whose sizes were a few micrometers. By contrast, voids occurred in the layer on the workpiece containing bigger precipitations because the precipitations not melted totally in the coating process were the starting points of the voids. In addition, the surface of the Si layer on FC250 was extremely rough and the distribution of the chemical elements of the layer was inhomogeneous. However, the layer was amorphous and the friction coefficient of the layer was lower than that of the workpiece.

本文言語English
出版ステータスPublished - 2015 10月 18
イベント8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015 - Kyoto, Japan
継続期間: 2015 10月 182015 10月 22

Other

Other8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015
国/地域Japan
CityKyoto
Period15/10/1815/10/22

ASJC Scopus subject areas

  • 産業および生産工学

フィンガープリント

「Influence of workpiece materials on the characteristics of the layers by electrical discharge coating」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル