Influence of track width on reproduction resolution of a shielded GMR head

Weixing Xia, Yoshio Suzuki, Hajime Aoi, Hiroaki Muraoka, Yoshihisa Nakamura

研究成果: Article査読

抄録

Achieving high linear density is indispensable for high density in perpendicular magnetic recording. Therefore, a narrow reproducing pulse is important. The degradation of the resolution of a narrow track GMR head is a concern due to the resolution degradation in track edge. The sensitivity function and output of a shielded GMR head with different read track widths were investigated by using a commercial software JMAG-Studio which was based on 3 dimensional finite element method. The results were compared with calculation by using the two-dimensional finite element method and analytical expression. Although the sensitivity, function in the track center became narrower when the read track width was narrower, almost no changes in the all track output by reciprocity occurred, for either perpendicular or longitudinal reproduction. Based on this calculation, our work showed that read track width had almost no influence on the reading resolution of a shielded GMR head.

本文言語English
ページ(範囲)982-986
ページ数5
ジャーナルKyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers
58
7
DOI
出版ステータスPublished - 2004 7月

ASJC Scopus subject areas

  • メディア記述
  • コンピュータ サイエンスの応用
  • 電子工学および電気工学

フィンガープリント

「Influence of track width on reproduction resolution of a shielded GMR head」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル