Improved flux pinning for high-field applications in BaHfO3-Doped SmBa2Cu3 oy-coated conductors with high density of random pinning centers induced by BaHfO3 nanorods

Shun Miura, Yuji Tsuchiya, Yutaka Yoshida, Yusuke Ichino, Satoshi Awaji, A. Ichinose, Kaname Matsumoto, Akira Ibi, Teruo Izumi, Masataka Iwakuma

研究成果: Article査読

4 被引用数 (Scopus)

抄録

The critical current performance of REBa2Cu3Oy-coated conductors must be isotropically improved for use in high-field coil-based applications operated at low temperatures less than 50 K. The high and isotropic critical current densities (Jc) with respect to the directions of the magnetic field under these operating conditions were achieved by a 3.8 vol.% BaHfO3 (BHO)-doped SmBa2Cu3Oy (SmBCO) film on a metallic substrate deposited with low-temperature growth (L-BHO film). In particular, the L-BHO film attained a high flux pinning force density over 1.5 TN/m3 at a temperature of 4.2 K. From the anisotropic scaling approach based on the effective mass model, a high density of random pinning centers in the L-BHO film plays an important role in achieving the high Jc performance at 4.2 K. In order to reveal the reason why the L-BHO film includes high density of random pinning centers, we compared the flux pinning properties and the dominant flux pinning centers between the L-BHO film and the other two samples: A 3.8 vol.% BHO-doped SmBCO film fabricated with relatively high-temperature growth, and a nondoped SmBCO film fabricated with low-temperature growth. From the comparison, it is revealed that the random pinning centers are induced by BHO nanorods.

本文言語English
論文番号8000606
ジャーナルIEEE Transactions on Applied Superconductivity
28
4
DOI
出版ステータスPublished - 2018 6月

ASJC Scopus subject areas

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • 電子工学および電気工学

フィンガープリント

「Improved flux pinning for high-field applications in BaHfO3-Doped SmBa2Cu3 oy-coated conductors with high density of random pinning centers induced by BaHfO3 nanorods」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル