Hot deformation behavior of near-α Ti-Fe alloy in (α+β) two-phase region with different Fe content

Behrang Poorganji, Makoto Yamaguchi, Yoshio Itsumi, Katsushi Matsumoto, Tomofumi Tanaka, Yusuke Asa, Goro Miyamoto, Tadashi Furuhara

研究成果: Conference contribution

抄録

In the present study, microstructure evolution of Ti-Fe alloys with different Fe content between 0.2-1.5mass% during hot deformation in (α+β) two-phase region is studied with focusing on effect of phase volume fraction at different deformation temperatures and strain rates. Hot deformation was conducted on the specimens quenched after b solutionizing at 1173K for 1.2ks at 1108, 1073 and 948K, by uniaxial compression by 50% at various strain rates ranged from 1 to 10-4 s-1. Initial structures are (α+β) lamellar structures of fine interlamellar spacing and colony sizes. Increase in Fe content results in increasing the fraction of the β phase at the given deformation temperature. Either colony size or interlamellar spacing is coarser at higher temperatures. At the higher deformation temperature where β phase fraction is larger, dynamic recovery of β phase is a major deformation mechanism while at a lower temperature, i.e., a higher α fraction, dynamic recrystallization of α phase occurs predominantly. It is concluded that critical strain needed for occurrence of dynamic recrystallization is decreased by increasing fraction of the α phase at the same deformation temperature, i.e., by decreasing Fe content. Furthermore, by increasing strain rate grain size of the recrystallized α is decreased.

本文言語English
ホスト出版物のタイトルTHERMEC 2009
編集者Tara Chandra, Tara Chandra, Tara Chandra, N. Wanderka, N. Wanderka, N. Wanderka, Walter Reimers, Walter Reimers, Walter Reimers, M. Ionescu, M. Ionescu, M. Ionescu
出版社Trans Tech Publications Ltd
ページ310-314
ページ数5
ISBN(印刷版)0878492941, 9780878492947
DOI
出版ステータスPublished - 2010
イベント6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009 - Berlin, Germany
継続期間: 2009 8 252009 8 29

出版物シリーズ

名前Materials Science Forum
638-642
ISSN(印刷版)0255-5476
ISSN(電子版)1662-9752

Other

Other6th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2009
国/地域Germany
CityBerlin
Period09/8/2509/8/29

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「Hot deformation behavior of near-α Ti-Fe alloy in (α+β) two-phase region with different Fe content」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル