High-throughput protocol converter based on an independent encoding/decoding scheme for asynchronous network-on-chip

研究成果: Conference contribution

2 被引用数 (Scopus)

抄録

This paper presents a high-throughput asynchronous protocol converter between two-phase communication links and four-phase pipelined routers for asynchronous Network-on-Chip. In the proposed protocol converter, two-phase input and output signals are encoded to and decoded from the four-phase signals, respectively, by using two controllers which are attached to the router. Since the two controls are realized respectively by using only the input signal and the output signal, the "two-to-four-phase" and "four-to-two- phase" conversions are independently performed. Therefore, each conversion is completely performed without input-output dependency. As a result, the proposed protocol converter achieves an up to 77 % increase in throughput under a comparable energy consumption with respect to that of a conventional protocol converter on a Silterra 0.13-μm CMOS technology.

本文言語English
ホスト出版物のタイトルISCAS 2010 - 2010 IEEE International Symposium on Circuits and Systems
ホスト出版物のサブタイトルNano-Bio Circuit Fabrics and Systems
ページ157-160
ページ数4
DOI
出版ステータスPublished - 2010 8 31
イベント2010 IEEE International Symposium on Circuits and Systems: Nano-Bio Circuit Fabrics and Systems, ISCAS 2010 - Paris, France
継続期間: 2010 5 302010 6 2

出版物シリーズ

名前ISCAS 2010 - 2010 IEEE International Symposium on Circuits and Systems: Nano-Bio Circuit Fabrics and Systems

Other

Other2010 IEEE International Symposium on Circuits and Systems: Nano-Bio Circuit Fabrics and Systems, ISCAS 2010
国/地域France
CityParis
Period10/5/3010/6/2

ASJC Scopus subject areas

  • ハードウェアとアーキテクチャ
  • 電子工学および電気工学

フィンガープリント

「High-throughput protocol converter based on an independent encoding/decoding scheme for asynchronous network-on-chip」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル