High-temperature oxidation behavior of TiAl-based alloys fabricated by spark plasma sintering

X. Lu, X. B. He, B. Zhang, X. H. Qu, L. Zhang, Z. X. Guo, J. J. Tian

研究成果: Article査読

36 被引用数 (Scopus)

抄録

Alloys of Ti-45Al-8.5Nb-0.2B-0.2W-0.1Y and Ti-47.5Al-2.0V-1.0Cr have been prepared by spark plasma sintering (SPS). Their high-temperature oxidation behavior at 1000 °C in air has been investigated. The results indicate that the Ti-45Al-8.5Nb-0.2B-0.2W-0.1Y alloy possesses superior oxidation resistance, which is greatly better than that of Ti-47.5Al-2.0V-1.0Cr alloy under the same condition. The enhanced property is mainly attributable to 8.5 at.% Nb addition. For the Ti-47.5Al-2.5V-1.0Cr alloy, the outer oxide scale is dominated by TiO2 with a small amount of Al2O3, and the inner scale consists of many separate alternating Al2O3/TiO2 layers. By comparison, the inner oxide scale of Ti-45Al-8.5Nb-0.2B-0.2W-0.1Y underneath the outer TiO2-rich layer is composed of TiO2 and a minor amount of TiN. Additionally, Nb is found to be enriched at the interface of the oxide scale and the substrate. The addition of Nb promotes the formation of TiN in the oxide scale and Nb-enriched diffusion layer between the scale and the substrate, which is effective to impede the diffusion of Ti and O ions.

本文言語English
ページ(範囲)220-225
ページ数6
ジャーナルJournal of Alloys and Compounds
478
1-2
DOI
出版ステータスPublished - 2009 6 10
外部発表はい

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

フィンガープリント 「High-temperature oxidation behavior of TiAl-based alloys fabricated by spark plasma sintering」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル