High temperature deformation and microstructure evolution of NiCo base superalloy TMW-4M3

Takaaki Hara, Toshiki Ishida, Katsunari Oikawa

研究成果: Article査読

1 被引用数 (Scopus)

抄録

The high temperature deformation and microstructure evolution of NiCo base superalloy TMW-4M3 during the isothermal forging process were studied. A uniform compression test of TMW-4M3 where both the strain rate and compression temperature were controlled showed dynamic recrystallization flow stress. The peak stress and steady stress of the deformation resistance curve were characterized with the Zener-Hollomon parameter. The average grain size after dynamic recrystallization was also correlated with the Zener-Hollomon parameter, but this relationship changed with compression temperature. We found that this temperature dependency was related to the pinning effect of the £A precipitates in the £ matrix and proposed a new prediction model for dynamic recrystallization grain size considering not only the Zener-Hollomon parameter but also the volume fraction of the £A precipitates. This enables us to calculate the average grain size after isothermal forging within an error of 12%.

本文言語English
ページ(範囲)632-640
ページ数9
ジャーナルMaterials Transactions
61
4
DOI
出版ステータスPublished - 2020

ASJC Scopus subject areas

  • 材料科学(全般)
  • 凝縮系物理学
  • 材料力学
  • 機械工学

フィンガープリント

「High temperature deformation and microstructure evolution of NiCo base superalloy TMW-4M3」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル