High-speed imaging by electro-magnetically actuated probe with dual spring

Dong Weon Lee, Takahito Ono, Masayoshi Esashi

研究成果: Article査読

7 被引用数 (Scopus)

抄録

This paper describes a magnetically actuated cantilever with dual spring (cantilevered actuator and torsional cantilever) for a high-speed imaging of atomic force microscopy (AFM). A fabricated cantilever beam with a high resonant frequency is successfully actuated by electromagnetic force. A planar coil is placed on the free end of the cantilever beam and embedded in a groove formed on the silicon cantilever to get a large deflection. Static and dynamic mechanical characteristics of the fabricated probes have been measured. The experimental results of the mechanical properties are compared with the calculation results obtained from a finite element method. When flowing a current of ±10 mA, a static deflection of ±2 can be achieved by a cantilever with a length of 400 μm. The scanning speed of AFM is increased up to 1 mm/s by actuating the high resonant frequency cantilever in constant force mode.

本文言語English
ページ(範囲)419-424
ページ数6
ジャーナルJournal of Microelectromechanical Systems
9
4
DOI
出版ステータスPublished - 2000 12

ASJC Scopus subject areas

  • Mechanical Engineering
  • Electrical and Electronic Engineering

フィンガープリント 「High-speed imaging by electro-magnetically actuated probe with dual spring」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル