High performance of electroless-plated platinum electrode for electrochemical hydrogen pumps using strontium-zirconate-based proton conductors

Takaaki Sakai, Hiroshige Matsumoto, Takao Kudo, Reiri Yamamoto, Eiki Niwa, Sachio Okada, Shinichi Hashimoto, Kazuya Sasaki, Tatsumi Ishihara

研究成果: Article

17 引用 (Scopus)

抜粋

The performance of an electroless-plated platinum electrode for electrochemical hydrogen pumps was investigated using SrZr0.9Y0.1O3-α (10Y-SZO) and SrZr0.5Ce0.4Y0.1O3-α (10Y-SZCO) as proton-conducting electrolytes. The plated electrodes using these electrolytes showed quite low overpotentials, resulting in high performance of the hydrogen pumps. The high electrode performance is interpreted from the viewpoint of the three-phase boundary (TPB) length: the plated electrode has a larger TPB length per unit area than that of the pasted electrode. The difference between 10Y-SZO and 10Y-SZCO in ability to match with platinum electrodes is also discussed, and the possibility that the TPB width of 10Y-SZCO with platinum is larger than that of 10Y-SZO is suggested.

元の言語English
ページ(範囲)8172-8177
ページ数6
ジャーナルElectrochimica Acta
53
発行部数28
DOI
出版物ステータスPublished - 2008 11 30

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Electrochemistry

フィンガープリント High performance of electroless-plated platinum electrode for electrochemical hydrogen pumps using strontium-zirconate-based proton conductors' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用

    Sakai, T., Matsumoto, H., Kudo, T., Yamamoto, R., Niwa, E., Okada, S., Hashimoto, S., Sasaki, K., & Ishihara, T. (2008). High performance of electroless-plated platinum electrode for electrochemical hydrogen pumps using strontium-zirconate-based proton conductors. Electrochimica Acta, 53(28), 8172-8177. https://doi.org/10.1016/j.electacta.2008.06.013