High-intensity multi-bunch beam generation by a photo-cathode RF gun

Koichiro Hirano, Masafumi Fukuda, Mikio Takano, Yoshio Yamazaki, Toshiya Muto, Sakae Araki, Nobuhiro Terunuma, Masao Kuriki, Mitsuo Akemoto, Hitoshi Hayano, Junji Urakawa

研究成果: Article査読

23 被引用数 (Scopus)

抄録

A multi-bunch photo-cathode RF gun system has been developed as an electron source for the production of intense quasi-monochromatic X-rays based on inverse Compton scattering. The desired multi-bunch beam is 100 bunches/pulse with a total charge of 500 nC and a bunch spacing of 2.8 ns. We modified the gun cavity of a 'BNL-type IV' RF gun to allow a CsTe cathode plug in the end plate. The system uses a four-dipole chicane beam line to allow the injection of laser light normal to the cathode surface. We compensate the gun cavity beam loading caused by the high-intensity multi-bunch electron beam by injecting the laser pulse before RF power has filled the cavity. We have achieved a total intensity of 220 nC in 100 bunches with a bunch-to-bunch energy spread under 1.3% (peak-to-peak). This paper concentrates on experiments to generate the high-intensity multi-bunch beam with compensation of the bunch-to-bunch energy spread due to heavy beam loading.

本文言語English
ページ(範囲)233-239
ページ数7
ジャーナルNuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
560
2
DOI
出版ステータスPublished - 2006 5 10
外部発表はい

ASJC Scopus subject areas

  • 核物理学および高エネルギー物理学
  • 器械工学

フィンガープリント

「High-intensity multi-bunch beam generation by a photo-cathode RF gun」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル