High-coercivity Nd90-xFexAl10 bulk amorphous alloys

Horia Chiriac, N. Lupu, A. Takeuchi, A. Inoue

研究成果: Article査読

抄録

Extensive magnetic studies on Nd90-xFexAl10 (x = 35 ∼ 50) amorphous alloys in the shape of both melt-spun ribbons with thicknesses between 25 and 150 μm and rods with diameters no larger than 3 mm prepared by mould casting and suction casting indicate a complex magnetic behaviour depending on the Fe content. The microstructure and magnetic properties are strongly dependent on the cooling rate and the preparation technique. The high values of the coercive field of Nd90-xFexAl10 amorphous samples in the as-cast state as well as their increase by the decrease of the cooling rate and temperature result from the formation of very small metastable or non-equilibrium clusters, whose size vary as a function of the quench rate. The presence of these magnetic clusters is evidenced by multiphase magnetic transitions observed from the ac-susceptibility measurements at low temperatures.

本文言語English
ページ(範囲)235-239
ページ数5
ジャーナルInternational Journal of Applied Electromagnetics and Mechanics
13
1-4 SPEC.
DOI
出版ステータスPublished - 2001

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering
  • Electrical and Electronic Engineering

フィンガープリント 「High-coercivity Nd<sub>90-x</sub>Fe<sub>x</sub>Al<sub>10</sub> bulk amorphous alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル