High Bs nanocrystalline alloys with high amorphous-forming ability

A. Urata, H. Matsumoto, S. Sato, A. Makino

研究成果: Article査読

8 被引用数 (Scopus)

抄録

The soft magnetic property and the structure of the new type nanocrystalline Fe-(P,B,Si,Nb,Cu) alloy with high Fe content about 80 at. % have been investigated. In this paper Fe77.9 P3 B14 Nb5 Cu0.1 alloy has a supercooled liquid region (Δ Tx) of 33 K defined by the difference between the glass transition temperature (Tg) and crystallization temperature (Tx), which would be relating to the high glass-forming ability leading a thickness of 140 μm melt-spun ribbon with a glassy phase. The Fe80.9 P2 B10 Si2 Nb5 Cu0.1 alloy with the higher Fe content can be melt spun into the thick ribbon with thickness of 65 μm due to rather large amorphous-forming ability. In addition, a homogeneous nanostructure composed of α-Fe grain with around 15 nm in diameter was realized after crystallization, and the nanostructured alloy exhibits the high Bs of 1.55 T and the low coercivity (Hc) of 4.6 A/m. The Bs and the glass or amorphous-forming ability of the alloys are superior to those for typical nanocrystalline. Therefore, the miniaturization and the realization of higher efficiency of power supply circuits in electric devices are able to be expected using these nanocrystalline Fe-(P,B,Si,Nb,Cu) alloys.

本文言語English
論文番号07A324
ジャーナルJournal of Applied Physics
105
7
DOI
出版ステータスPublished - 2009

ASJC Scopus subject areas

  • 物理学および天文学(全般)

フィンガープリント

「High Bs nanocrystalline alloys with high amorphous-forming ability」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル